Manual lens adapter ring FD-C

Roll over image to zoom in

Manual lens adapter ring FD-C

FD-C

Manual lens adapter ring FD-C

About this item

  • Quality copper aluminum alloy precision manufacturing, ring with the camera bayonet close and smooth, the fine copper bayonet will not wear the lens, durable.
  • Lens interface with fine copper material, higher precision, easy to wear, durable.
  • Red dot mark, accurate alignment, convenient installation and disassembly.
  • Full manual control, manual focusing, aperture priority, infinity focus.
  • Please note: Infinity focus position?the position of the infinity mark ???of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
For product extended warranty services please click HERE

Features:
Allows focus infinity
Elegant clear appearance
Compact and high quality metal material
High Precise to ensure the perfect fit
Diaphragm control of the lens is set manually

Instructions for use:

Attention:
1.Manual adapter without autofocus or aperture ring.
2.Skillful installation, don't too much force.
3.Adapting an APS-frame lens to a full-frame camera may generate vignetting, some cameras could correct it by adjusting APSC.
4.Adapting a full-frame lens to an APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera
Infinity focus position:
The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

No Lens Attached' - Warning Message Appears:
1.If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will be maximum aperture by default.If you want to adjust the aperture but without manual control ring, then you need to remove the adapter ring and adjust the aperture on the camera.
2.Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

like

More by K&F CONCEPT Product

Auto Focus Electronic Adapter Ring EOS-FX

Manual lens adapter ring III generation EOS-NEX

Manual lens adapter ring C/G-EOS M

Manual lens adapter ring FD-EOS

  • IMAGES

  • VIDEOS

close
No videos for this product.

Videos for this product

No videos for this product.

Rewards

close img

welcome to

K&F CONCEPT

close img

Cookies on kfconcept.com
We use cookies to give you a better service. Continue browsing if you're happy with this, or find out more about Privacy Policy.