NIK(G)-E

Manual lens adapter ring NIK(G)-NEX

Smooth surface for effortless mount,infinity focus allowed. Allow Metering: AE Priority / Manual Stop-down Metering.
With this Lens Mount Adapter, you can mount Nikon lens (G/ F/ AI/ AIS) to be used on Sony E mount ,Sony NEX-3 NEX-5 camera body. This adapter is different from other nikon sony e mount adapter, its has an Aperture Control Ring, this adapter fits ALL Nikon mount lenses.
Compatible Cameras (Including, but not limited to):Sony Alpha a7, a7r, a7s, NEX-3, NEX-5, NEX-C3, NEX-5N, NEX-7, NEX-F3, NEX-5R, ,NEX-6, NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900, NEX-FS100, NEX-FS700, NEX-EA50. (NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II.)
Please Note: If you want to use nikon AI lens on this Nikon(G) adapter ring, it could be attached, but the aperture control ring could not be used，as there is a pin on Nikon(G) lens that could move the aperture control ring but no on AI lens.
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

For product extended warranty services please click HERE

This adapter gives you the ability to use your irreplaceable prime lens and saves you the cost of purchasing new lenses
The adapters are precision made to insure the perfect fit.
Allows focus infinity.
Diaphragm control of the lens is set manually.
High quality and compact.
Nikon sony e mount adapter
Made of brass and aluminum (not plastic).

Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I / II / III, α9 I / II, α1; Sony Alpha α3000, α3500, α5000, α5100, α6000, m α6100, α6300, α6400, α6500, α6600; Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7
Sony Smartshot QX1, QX10, QX30, QX100
Sony Security SNC-VB770, UMC-S3C
Sony Handicam NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900
Sony NXCAM NEX-EA50, NEX-FS100, NEX-FS700, NEX-FS700R
Sony XDCAM FS5, FS5 II, FS7, FS7 II, FX3, FX6, FX9
Sony CineAlta VENICE

If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow.
Specifically refer to the camera manual Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions willnot operate while using this adapter.There is no electrical contacts in the adapter ring. Full manual operation,manual focus, manual iris adjustment can be achieved with body manual exposure,aperture priority exposure.In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body.You can shoot in Manual or Aperture Priority Mode. Before use,set your camera Menu: "Shoot without lens".


	1st Generation	3rd generation	4th generation
Camera Mount	NEX	NEX	NEX
Lens Mount	NIK(G)	NIK(G)	NIK(G)
Difference	Precision and Simple Classic Design: Let 300,000 users recognize this series of adapters.	Creative Design: The square is more advantageous than the circular shape to prevent rotation and slipping, and save effort when the installation and release of the camera.	Texture design: The fine lines carved with precision CNC machining equipment enhance the texture and layered sense of adpter.