Manual lens adapter ring PK-M4/3

Roll over image to zoom in

Manual lens adapter ring PK-M4/3

PK-M4/3

Manual lens adapter ring PK-M4/3

About this item

  • This adapter makes all Pentax K & PK mount lenses can be used on Micro 4/3 SYSTEM cameras.
  • Pentax K PK Lens to Micro 4/3 M4/3 camera.
  • Compatible Cameras (Including, but not limited to): Compatible for Olympus PEN E-P1, E-P2, E-P3, E-P5, E-PL1/s, E-PL2, E-PL3, E-PL5, E-PL6, E-PL7, E-PL8, E-PM1, E-PM2, PEN-F, Air A01, OM-D E-M1/II/X, E-M5/II, E-M10/II/III, Lumix DMC-G1, G2, G3, G5, G6, G7, G9, G10, Lumix DMC-GF1, GF2, GF3, GF5, GF6, GF7, GF9, G80/85, G90/G95, DMC-GH1, GH2, GH3, GH4, GH5/S, DMC-GM1, GM5; DMC-GX1, GX7, GX800/850, GX8, GX80/85, GX9,AG-AF100/104 Mirrorless Digital Cameras.
  • There are no electrical contacts in the adapter ring, exposure and focus has to be adjusted manually.
  • Please note: Infinity focus position:the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
For product extended warranty services please click HERE
1
1

Instructions for use

Attention:

Manual adapter without autofocus or aperture ring.

Skillful installation, needn't too much force.

'No Lens Attached' - Warning Message Appears:

If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.

Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

1

Features:

  • Lens: AI(G) Mount Lens
  • Camera: M4/3 mount Cameras
  • Compact and high quality with metal material
  • Precise production to ensure the perfect fit
  • Diaphragm control of the lens is set manually
  • Allows focus infinity
  • Elegant clear appearance

1

Infinity focus position:

  • The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

1

Notes

  • Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
  • Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.

like

More by K&F CONCEPT Product

Manual lens adapter ring EOS-FX

Manual lens adapter ring NIK(G)-FX

Manual lens adapter ring OM-NIK Z

Manual lens adapter ring NIK(G)-NIK Z

  • IMAGES

  • VIDEOS

close
No videos for this product.
Videos for this product
No videos for this product.

Rewards

close img

welcome to

K&F CONCEPT

close img

Cookies on kfconcept.com
We use cookies to give you a better service. Continue browsing if you're happy with this, or find out more about Privacy Policy.