Manual lens adapter ring OM-M4/3

$30.99

Quantity

Supported Payment Method paypal icon

About this item

Manual adapter without electrical contacts, automatic diaphragm/autofocus is not allowed.
It allows Olympus OM lenses to fit a Micro 4/3 (MFT) camera body. Compatible Cameras (including, but not limited to): Olympus PEN, OM-D Series, Panasonic Lumix DMC-G1, G2, G3, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4, Panasonic AG-AF100 Mirrorless Digital Cameras, Black Magic Pocket Cinema Camera (BMPCC)
The infinite focus function is allowed, please set the manual and check the production description if you have any problems.
All-metal design; High quality anodized aluminum and brass construction.
Any questions or problems about products, please contact us for a solution, we are always here for you.

For product extended warranty services please click HERE

Product Description
Reviews
Product Q&A

Product Specifications

K&F Concept Lens Adpter Ring for OM Mount Lens to Micro 4/3 Camera Body

Manual adapter without electronic contacts, doesn't support autofocus/auto diaphragm/aperture control.
Adapting APS-frame lens to full-frame camera, it may generate vignetting, some cameras could correct it by adjust APSC.
Adapting full-frame lens to APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera.
Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

Suitable for:

Lens: Olympus OM Mount lens
Camera: Micro 4/3 (MFT) mount mirrorless camera
Properly installed when you rotate about 90 degrees and hear a light "click".
Please screw the lens adapter lightly and skillfully, needn't too much force.

Infinity focus position:

The position of the infinity mark [∞] of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.

Note: 'No Lens Attached' - Warning Message Appears

The camera needs to be set to function without an E-Mount lens attached. You can do this by changing the following camera setting: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location of this option may change depending on camera model). If your lens does not have a manual aperture control ring, it will stop down to its smallest f/stop by default.